Sample of finished kit shown above w/#810 3R wheels
This is a short wheelbase T-jet and an excellent racer body.

Body is molded as in solid color.  You paint details as needed.
 Screw posts come solid - Add $1 if you want predrilled.
Avail. in STANDARD or

Glass is like original Aurora's
Parts available separately, if desired:
GLASS - #1415-G  $7ea.
BODY - #1415-B  $10ea.
BUMPERS - #1415-F or -R $5ea.
KIT (all of above) - #1415-K  $25 ea. (kit discount)

PAINT MASK TEMPLATES AVAIL. TOO
#1415-T for Paint Mask
SEE BELOW for paint details using paint mask templates.

PAINTING STEPS

Start by trimming flash and prepping body in
laquer thinner (1 min.) or soap and water.

Apply hood mask template and spray with flat black paint.

Apply side mask template.
Start at rear side marker, then align sides.
Press ends of strip on good to body for contour at wheel wells.

Shoot with flat black paint.  Remove template.

Let the black paint on hood dry thoroughly before
applying silver paint mask template.  The square in the center
aligns the hood scoop and lets template lie flat.
I "finger" the back of the template somewhat to
lessen the tack of the template so it doesn't pull
any of the flat black hood paint off the car body
when the silver template is removed.

Cover hood scoop square with rectangle piece.
"Finger" the back to lessen tack.

Be sure wipers and hood pins are aligned,
then shoot silver paint.  Light coverage works well.

Remove template

Paint rear bumper tail lights spraying with flat red paint.

The finished product.

Group of bodies just finished painting.  I found the templates
will work easily 3 times if kept in good condition.

7184 Hwy A
Strafford, MO 65757
417-736-2494
Mon. thru Fri. 9am-5pm CST (closed weekends)

Images and information are not to be copied or reproduced without written permission from Road Race Replicas.
(C) Copyright 2005, Road Race Replicas